PDA

View Full Version : The Boiler Room



halloweenroom
05-19-2010, 11:23 AM
Ok so i am remaking the "old" boiler room. But i am runninig into trouble! I want to somehow incorporate steam in the room and i was thinking of using a type of mister they use in the produce section at the grocery store. BUt i have no clue where to find that. Does anyone have any idea on how to generate mist or steam for a reasonable price? Or what that mister is called at the store?

thanks guys

xtremecreator
05-19-2010, 11:31 AM
How about a fog machine? Thats what I would do....

Xtreme

halloweenroom
05-19-2010, 11:33 AM
i was trying to get the feeling of water spraying on them. but not soak the floors

xtremecreator
05-19-2010, 11:41 AM
Using any kind of mist will build up after a while. Just take the fog machine and have it mounted to a main pipe and from that pipe it "T"s off to small pipes or tubes the fog/steam comes out of. I think it will look just like it if it comes out of small tubes or holes.

Xtreme

Allen H
05-19-2010, 11:56 AM
Any mister will soak the floors. The misters that Grocery stores use are there to soak the vegtables. Look for mister units and you will find them. they dont look like steam unless its very humid or cold. We had that system at Skull kingdom out front.

RJ Productions
05-19-2010, 01:06 PM
Focusing on using the fog technique, pipe fog through the large septic pipes. You can bore small holes along the pipe. Add an inline fan that you can but at Home Depot for home heating systems if you have trouble getting the fog all the way through the pipe. Cover the pipe with a cloth sleeve that you paint and scenic. Fog doesn't just billow out the holes, it is difused by the cloth and has the look of steam coming off the pipe.

If you do use some sort of mister in conjuction with a fog effect have it over an area of the floor where you can add some sort of rough walk surface. Maybe a section where you actually have gravel on the floor to avoid a slipping surface. While you might get a bit of a built up, if you control the mist, not just have it run constantly, the audience will actually absorb most of the mist. Add the gravel floor and you should be safe.

unihaunter
05-19-2010, 01:34 PM
You could end up with mold and mildew issues if the area stays damp all season.

halloweenroom
05-19-2010, 02:54 PM
Thanks for all your help guys! Looks like i have some thinking to do....

disturbedproductions
05-19-2010, 06:48 PM
oak island productions has a mister system that you can set the amount of mist on depending on the effect you are going for

halloweenroom
05-21-2010, 10:42 PM
do you have a link for that?

damon wilde
05-22-2010, 09:11 PM
see pg 17

http://issuu.com/damonwilde/docs/2010scareproductscatalog

Raycliff Manor
05-24-2010, 02:11 PM
We use Edge Design Steam Pipes, https://edgedesignsonline.com/Large_Animated_Stuff.html , in our Carriage House attraction. We have no problem with the floors getting wet at all. The animation uses fog and it's very effective!

Kel

RJ Productions
05-27-2010, 01:01 AM
Make sure you build some cast iron furnace doors, no boiler room is complete without them!!!
Larry had some real boiler doors in the Darkness. I took pictures of them.

Since there probably has never even been a boiler in Las Vegas, I had no choice but to build.
I have a crematory scene. Casket rolls out of the furnace with a half burnt actor inside.
I had a big space above so I made the doors out of wood, flicker lights behind the penings or vents in te doors,
added a couple old urns (actually flower pots from the Dollar Store with the rim cut off and painted with a patina)and we're good to go.