PDA

View Full Version : Check out THIS Air Cannon!



UnDeRTaKer313
06-21-2010, 11:58 PM
Allright. So we have been experimenting for the last few years with what we believe is "the perfect air cannon." We have tried some different valves and tanks, different arrangements. We tried every design that was already on the market, ect.

3 Problems with the Consumer Air Cannon
-COST $300-$1500
-Dangerous/High Air Pressures -(125psi can inject anything in its path into a guest's skin)
-Large Volumes of Air Required

3 Benefits of our "Perfect Cannon"
-Cost $199
-30-40 PSI Operating Pressure
-Tank is ready to be fired every few seconds, without over-working your compressor


We are now offering this cannon to the Haunted Attraction Industry for $199
http://i843.photobucket.com/albums/zz360/Hellsgate2009/ProfessionalAirCannon.jpg

The reason the cannon is one of the cheapest on the market is because of the way it is designed. It has never been done before. It eliminated expensive valves and manifolds, the power is all in the engineering of the entire apparatus.

Your getting the power of 125 psi cannon that costs $1000 and your only using 30 psi at a cost of just under $199.

For more information or to place an order
info@ihphaunts.com

UnDeRTaKer313
06-22-2010, 12:11 AM
CLICK FOR VIDEO
30PSI! Hitting a Prop
http://i843.photobucket.com/albums/zz360/Hellsgate2009/th_MonsterBlast.jpg (http://s843.photobucket.com/albums/zz360/Hellsgate2009/?action=view&current=MonsterBlast.mp4)
CLICK FOR VIDEO
30PSI! Hitting Paper (Compare to Competitors Video)
http://i843.photobucket.com/albums/zz360/Hellsgate2009/th_PaperBlast.jpg (http://s843.photobucket.com/albums/zz360/Hellsgate2009/?action=view&current=PaperBlast.mp4)
CLICK FOR VIDEO
30PSI Hitting a Piece of Styrofoam
http://i843.photobucket.com/albums/zz360/Hellsgate2009/th_StyrofoamBlast.jpg (http://s843.photobucket.com/albums/zz360/Hellsgate2009/?action=view&current=StyrofoamBlast.mp4)

chuck weber
06-22-2010, 10:01 PM
looks like a great deal

Gore Galore
06-24-2010, 07:19 AM
I am sorry but I have to speak up.
I am very curious what happened to the very valuable feedback from haunters and vendors you were getting on this thread.

You were not being attacked, but you were being given some wonderful feedback that could help you vend for years to come and all that feedback is now gone.

-You should be carrying general liability insurance if you are selling any products to this industry.
-If you are using water sprinkler valves in this cannon you need to rethink your design. Water sprinkler valves are not intended to handle compressed air and can become brittle and shatter sending dangerous shrapnel everywhere.

Have you heard of Johnson Animatronics?
They used to use Sprinkler valves in some of their products, but they received some valuable feedback from vendor members of the HHVA and other haunters such as what you are receiving now and they upped the bar. They are now making some AWE inspiring products. They would not have done that without the help of some of the wonderful haunters in this industry.

So please do not think of what has been said as an attack on you or your products. It is not. This feedback will not only save your life but possibly others and help keep you making air cannons for years to come.

gadget-evilusions
06-24-2010, 07:56 AM
there are two threads Kevin.

http://www.hauntworld.com/haunted_house_forums/showthread.php?t=12215

Gore Galore
06-24-2010, 10:59 AM
thanks Brian,

Undertaker, Sorry I brought it up again.
But Gadget, thanks for being one of the caring haunters who is helping to move everyone in safer directions.