PDA

View Full Version : Anyone use stucco?



bhays
03-31-2011, 06:02 PM
I need to cover these walls to achieve a boiler room wall look. We have always used a monster mud mix w/ sand and it works ok, but interested in other options. What would you use?http://184.72.239.143/mu/451b33bf-07f2-91ac.jpg

Sent from my iPhone using Tapatalk

Front Yard Fright
03-31-2011, 06:10 PM
I would think MM would be your best bet... Or even just straight joint compound. The only reason I see using Stucco would be if it was outdoors or if was cheaper than the other route.

Dreamreaper
03-31-2011, 11:14 PM
are you using any type of wire on that? nothing will stick very long with out it. I have products that make caves, Rocks,waterfalls and so on. more costly than MM but will hold up.

Allen H
04-01-2011, 12:24 AM
You can use spray on acrylic stucco. Really good stuff. about $60 for a five gallon bucket.

bhays
04-01-2011, 07:44 AM
You can use spray on acrylic stucco. Really good stuff. about $60 for a five gallon bucket.

Where do you buy it? Brand name? Thanks.


Sent from my iPhone using Tapatalk

Jim Warfield
04-01-2011, 08:38 AM
Maybe heroin would be cheaper?
Turning the lights down always works.
How much would hiring a seamstress to sew up custome blindfolds cost?
I get it.. "Stuck... OH!" (it hurts!)

Allen H
04-01-2011, 08:46 AM
Senergy is the brand name. you are in Indiana so here is a compnay that sells it in Indiana.
http://www.acousticsupply.com/senergy.html
And here is their site to learn more about the product in general.
http://www.senergy.basf.com/EN/Pages/default.aspx

Allen H

MindWerxKMG
04-01-2011, 11:12 AM
We use Pro-Kote spray-on acrylic stucco.

bhays
04-01-2011, 11:17 AM
We use Pro-Kote spray-on acrylic stucco.

Do you have to use wire or can you spray right on to foam/wood.


Sent from my iPhone using Tapatalk

MindWerxKMG
04-01-2011, 11:53 AM
You spray it directly on the wood.

Allen H
04-02-2011, 11:45 PM
Right on the wood for senergy also.