PDA

View Full Version : Paint technique



Nightmare Forest
06-08-2011, 06:23 PM
Does anyone have any good techniques on how to paint walls to look like wood siding/slats? Any help is appreciated.

Allen H
06-08-2011, 10:42 PM
Get a wood grain tool. Paint the walls the color you want inbetween the slats. then tape (masking tape) the area between the slats and paint the wall the wood color. then use the wood grain tool like this-

http://www.youtube.com/watch?v=EzoEjlV-l0U
Allen H

damon carson
06-08-2011, 11:57 PM
Kevin Mckurdy has alot of cool techniques on his videos how to do this. Go to hauntedhousesupplies.com
Damon
Frightmasters
www.houseoffright.com

terrormasue
06-09-2011, 10:37 AM
I used masking tape and black paint with a wide brush. Brush right over the masking tape using a fairly wet paint. Go back over with a dry brush for the browns and lighter high lights. This is OSB with is pretty rough anyway. It worked good enough for me. People think it slat siding.9805

Twin Locusts
06-09-2011, 10:58 AM
That aint the first time what that boy slung some paint down.

Mad Wax Sculptor
06-09-2011, 03:56 PM
faux wood graining can very time consuming but you start with a brown base paint then dry brush tan in the direction of the grain you wish to achieve. You will then use a 1" foam brush (buy several foam brushes as they will tear) Then dip the tip of the foam brush into black paint and then paint the boards out onto the base (4 to 6 inches wide or wider and 6 to 8 ft long). After you lay out your board out lines then you use the same foam brush with either black or darker brown paint to do the fine wood grain patterns. To add extra detail paint knots,cracks and breaks between boards with Black paint. I usually will dip my finger tip into black or gray paint and add nail heads on some boards. after you do this a few yrs you may choose to use real wood plants like old fence wood. I hope this helps

Allen H
06-09-2011, 05:57 PM
Patrick- I still cuss somtimes thinking about painting the addamsville facade.

Nightmare Forest
06-10-2011, 01:57 AM
Awesome info. I appreciate all everyone has said. I am going to play with every technique mentioned.

Allen do you recommend any specific wood grain tool? I see there are several on the market.

Mad Wax Sculptor
06-10-2011, 02:26 PM
Allen
That funeral home facade still looks great to this day. Yeah I know it was a lot of hot ,hard work but it shows

Allen H
06-10-2011, 05:37 PM
I had one that was associated with martha stewart, I think her grim visage was on the packaging, but almost any will work fine for you I bet.

Mad Wax Sculptor
06-16-2011, 12:01 PM
I think Garden ridge has then I also know they have foam bricks to paint a brick wall with