PDA

View Full Version : What prop controller do you use and why?



Capt.Chaos
10-19-2011, 10:43 AM
We are playing with a few styles of prop controllers and was wondering what you guys prefer? We have a couple maestro 2s and we love the simplicity but wish it had more outputs. We have 1 prop 1 controller but find it very hard to program but we love the cost and number of outputs. We even have a gilderfluke with 40 outputs that we bought for our elevator we built. It will be awesome for that but it was over $1000.00 and we ended up using a maestro to just get it going for opening week. It worked awesome. Your advice is welcome and appreciated. I do not want to be a computer programmer to run these things. People like me because I can lift heavy things.

Chaos

beardedbil
10-19-2011, 11:22 AM
The fright ideas controllers are great. You can find them on the frightprops website.

http://www.frightprops.com/controllers-electronics/frightideas-controllers.html

If you need any assistance with complicated or extensive programming of your scenes/props, just let us know!
Best,
Bill Rod
Dark Tech Effects

evilmanor
10-19-2011, 11:33 AM
X2 on FrightIdeas controllers

setdesigner
10-24-2011, 06:51 PM
Again...Fright Ideas/Fright Props Boo Boxes. Great product, and tech support is AAA !

sysasi
10-24-2011, 07:04 PM
Fright props boo boxes also :) love them!

bhays
10-25-2011, 07:49 AM
Transitioning to all Prop1's at our place. Once you get a handle on BASIC they are so powerful for the cost.

gadget-evilusions
10-25-2011, 11:37 AM
I have been using all EFX-TEK products, mostly the Prop-1, since 2006. This year we built a new haunt, and I needed an audio system, so I installed 32 of their AP-16 audio boards to give me 64 channels of audio. That's a speaker in every room with separate control. That's in addion to all the prop-1's, prop-2's, EZ-3's, and everything else.

They are not for everyone, because they do need to be programmed, but they make controllers like the EZ-8 and the new EZ-3 micro for people who want super reliable controllers without the programming. I swear by my EFX-TEK controllers.

Darkmaster
11-22-2011, 12:00 AM
We have used a number of controllers. Maestro II and vari-pets from Cowlacious http://www.cowlacious.com/categories/Prop-Timers/. I will be working with Picoboo controllers next year.

Darkmaster
12-24-2011, 02:33 PM
I have recently purchased (2) nerve centers made by Monster guts. These are great controllers to use and can incorporate sound with a variety of arrangements.

I highly recommend these. The Maestro II is easy to use also, but, an extra audio device needs to be pruchased.

Jim Warfield
12-24-2011, 09:32 PM
.. is my right hand.
Holding a steel cable or a lever, or a small radio-remote control or a simple electrical switch, just like everyone has to turn on their front room ceiling light with.
I forgot. A couple of push buttons too.
Plain store bought motion switches control a few small noise making things and a couple of lights.. that's it.
I was forced to do things this way when the wiring harness to my Oui-Ja board melted on Friday the 13th!

Darkmaster
06-07-2012, 09:29 PM
Here's an update. I have wired in my PicoBoo's and Nerve Centers. I must say that I am very pleased with these. These are stand alones and don't need any computers to program and operate.

These are very simple units.

Capt.Chaos
06-14-2012, 10:34 PM
Thanks Guy's. I am going to use a mix of Prop 1's and Pica Boos depending on the scene. Both seem to have their place. Have a great season.

Buck

slaughtermail
06-15-2012, 11:12 PM
While I have never used any other controller, I've never wanted/needed too. Travis with fright props makes AWESOME products & stands behind them. Personally I NEVER had any problem with one of is units & after talking to him I feel like if I did..... he would take care of it... just my 2 cents.