PDA

View Full Version : Claustrophobia DIY



Haunt man
02-29-2012, 10:26 PM
I would like to make my own Claustrophobia effect, I know so many haunts use them but I hear alot of customers walking out of the haunts talking about that room with the black walls that squeezed you to deathr. As far as I can see it is just made of vinyl fabric and a blower.
I would think the vinyl would be attached to backing- plywood maybe, the blower in-take and a vent so it doesnt just explode.
does this sound right? Has anyone esle made one before or know how to?
Thanks!
haunt man

Capt.Chaos
03-03-2012, 08:34 AM
I am going to utilize this effect in our show this year. I will be using a half one. Being pretty good at figuring things out I did some research on making my own. First I need to buy the material. 2nd I need to get it vinyl welded so it doesnt loose air. 3rd I need to buy a fan. By the Time I run around and get all this done I save maybe $150. I'm buying one. It is very tough for me to pay for things I know I can do myself. However, I have learned( and still need to remind myself) that I am way happier, less stressed out, and more productive when sometimes I just write a check. Good luck.

Chaos

Haunt man
03-03-2012, 11:16 AM
Chaos,
I do REALLY understand you point. Where do you plan on buying yours? I looked around and the best price I can find for one is around $1500 for a 8footer and a long one (24ft) is about $2000. I thought of maybe using the stuff they make moon bounces because they sell kits to make repairs and all you do is sew it together. plus the blower.

screamforadream
03-03-2012, 02:09 PM
From past experience, I can't stress enough that the ONLY blower anyone should bbuy is a B-air blower, they are the ONLY ones anyone with an IQ above 1 and knows anything about inflatables, knows B-AIR is the best. Why not make a 4 ft one too?? If EVERYONE has the big black walls, why not do something unique?? Use a TON of chilled fog over a 4' inflatable wall instead and make them Wade through a path. Or buy a clear vinyl and have an actor inside with a heavy strobe taunting them?? If you're handy enough to make youre oown, don't settle for the standard! :)

Haunt man
03-03-2012, 03:27 PM
From past experience, I can't stress enough that the ONLY blower anyone should bbuy is a B-air blower, they are the ONLY ones anyone with an IQ above 1 and knows anything about inflatables, knows B-AIR is the best. Why not make a 4 ft one too?? If EVERYONE has the big black walls, why not do something unique?? Use a TON of chilled fog over a 4' inflatable wall instead and make them Wade through a path. Or buy a clear vinyl and have an actor inside with a heavy strobe taunting them?? If you're handy enough to make youre oown, don't settle for the standard! :)

I really like the idea for the clear vinyl, I actually just bought a roll of clear vinyl for some props. I may have to try that... back light it with a strobe, yeah, I'm diggin it! :D

Capt.Chaos
03-03-2012, 03:58 PM
Alright Bobby. Now ya have me thinking about building my own again. Ours will be about waist high with fog and green lasers above it. People will be "wading" through our sewer. Not tough to build by any means but the issue is I think they vinyl weld these things together. Otherwise if you just sewed them I think they would leak. material is a vinyl tent material about 10 oz. I think. I was going to look into doing a package deal with G.Maser as I need a tent for one of my other business anyway.

Chaos

prfields6038
03-03-2012, 04:00 PM
I just bought a 16' squeeze room from George Maser 864-761-7223 www.tentsandsigns.com. Real good price.

screamforadream
03-03-2012, 05:10 PM
Hahaha, sorry about that! ;P

And if you have ever been in any commercial inflatable, (bounce house, slide, etc) you'll notice that anywhere the seams are, there's usually air coming out. THAT IS OKAY. It's supposed to happen! You want a constant flow, otherwise your material could burst, or easily cut. My BIGGEST concern with waist high inflatable material would be patrons shoes ripping the bottoms, so be sure to actually design it with EXTRA vinyl in the middle, so that the bulge is wider, and your customers shoes won't be kicking at the seam, also lessening your concerns about the vinyl welding you may or may not be doing if you DIY.

I was on my phone before, here's the blowers I was talking about, http://www.b-air.com/inflatable/products.htm?gclid=CIbWiNv4y64CFUHf4Aodmwtr_Q ALOT of 3rd parties sell them for more, and less of advertised price, don't be afraid to shop around for them, Google Shopping is incredible! lol. But do beware of USED fans, if they aren't taken care of there's a much greater chance of an electrical issue or a jammed fan.

If you go full size and have an actor in it, do your plywood frame, and drill maybe1/4" holes across the bottom of the plywood, to act as a vent, and try to make that actor entrance into the piece as tightly sealed as possible, a door snake would come in handy here! lol. Even blood spatter on the inside of it would look creepy with a strobe and clear vinyl, I'd like to make one this year (if there's time), I'm investing in an already made hospital themed attraction, and for the mental ward part I'd like to make it inflatable, so the mental actors can be crazy, i picture a typical crazy guy, a boy dressed in little girls dance clothes and a creepy doll dance partner, my mind is spinning, I really want to take a twist on already existing effects and turn them into something no one has ever seen before!!! =)

Haunt man
03-03-2012, 06:07 PM
heres a thought, if you go with the clear and put a actor inside youll have to sew their costume together and in to thier shoes as well you will need to find a way to keep theier costume tight altogether. Other wise it will be blown everywhere and just be a mess.
Great Ideas! im going to have to build this soon! I have one project going right now as soon as wthats done ill move to this and ill keep everyone posted and upload a video when im done!
Happy haunting!

screamforadream
03-03-2012, 07:08 PM
Sounds great! Keep us posted!

fearforyourlife
03-07-2012, 04:25 PM
Yeah I'm thinking about doing this too. I was going to go with scare products version, but found one on ebay for much cheaper...almost half price. I might go with that one. The difference between the two is scare products is fabric whereas the ebay one was vinyl.

screamforadream
03-10-2012, 03:42 PM
Stay away from Kaotic Entertainment, he was on here previously under a different name and got banned, now he's back under this and he's only trying to screw over people he already screwed over and cause issues. I don't know John, or if he even exists, but just stay away from interacting with this guy, he's bad news.

KaoTic Entertainment
03-11-2012, 10:26 AM
Dont know who you are Bobby .and really dont care . But guys if you want The Claustraphobia wall set up way Cheeeeeeeeeeaper then any
one else is selling it for then contact John at 1-501-912-7976 he has a local guy who can make them . We have been through his haunt and he uses them in his haunt pitch black in color and Very well constructed . And for a killer price .

screamforadream
03-11-2012, 05:55 PM
Full of crap, I stopped you before for pulling some crap on the Trading post, don't play dumb, stop trying to take advantage of the new people on this board you thieving scam artist. How many times do people have to tell you to fluff off before you get the hint that no one wants you or your two cents? I've said my peace, I've warned people of you, you can continue to be immature and manipulative if you'd like, but anyone with half a brain will see right through you. Go on, come back with another response and show everyone just how dumb and foolish you are, I'm done talking with you.

Frightener
03-23-2012, 06:33 AM
Guys, that's a killer idea! I imagined the laser wall with fog creating the lagoon effect, and underneath the inflatable wade through part? Am I getting that right? If so, that's killer. If not, try it! What I"m imagining seems very cool. People won't know it's there until they go through the fog. Ya know, I never thought of having one of these. Although very neat, after thinking about putting one in my haunt, unless i'ts in a clown room, I never thought there to be a good reason / theme to fit.

This has gotten me excited!! It may be just right for a CAVE! too! Would be awesome to build a cave above the walls, cover the blow up / wading inflatable with the laser and fog and when they hit it they'll be sucked into that room for a good while!


Thanks for the ideas guys. I think my curved cave just became STRAIGHT! HAHA.


Dewayne