PDA

View Full Version : Prop Controller/ 3 Stage Event Timers



halloweenroom
03-20-2012, 10:35 PM
12492

Developed for haunted attractions with home haunters in mind, this easy to use 3 stage prop controller works like a charm. Powered by any 6-12v DC power supply the bare bones prop controller can be triggered by switch or PIR (Passive Infrared)! After the switch or PIR activates the controller, the first stage is a time delay before the event is triggered, stage two determines how long the event is ON and stage three is the length of time before the controller can be re-activated. All of the stages can be adjusted from about 0.5 seconds to 60 seconds. The controllers relay has a NO and NC contacts. This will enable you to turn something off while the event is triggered and turn it back on when the event is done. Delay before, ON and Delay after with perfect precision, just dial in how long you want! Flip-Flop lights for a mirror changing illusions! Bring your pneumatic props to life! Several DC items can be triggered at the same time to create a complex animation!

Use for DC 12v props only (10A Max). Not for use with any 110v props or lighting.

If anyone is interested or has any questions please PM me or post on this thread.

Trail of Terror
03-21-2012, 07:10 AM
what is the cost on this

halloweenroom
03-21-2012, 11:30 AM
what is the cost on this

the unit sells for 59.95 but i can let it go for 49.95. l

Trail of Terror
03-21-2012, 12:47 PM
the unit sells for 59.95 but i can let it go for 49.95. l

how many do you have... I will take that one but would like to have more... does it come with a book on how to set it up and program it

halloweenroom
03-22-2012, 03:38 PM
how many do you have... I will take that one but would like to have more... does it come with a book on how to set it up and program it

I have a video out on you tube for it, I will post a link soon. TRUST ME, its real simple!