PDA

View Full Version : Needed: 4' x 8' Vacuform "Steampunk" type wall panels.



TrueDungeon
11-30-2012, 04:25 PM
I am in need of several 4' x 8' Vacuform "Steampunk" type wall panels. Can anyone please recommend a good source?

Thank you.

Allen H
11-30-2012, 04:38 PM
http://www.nethercraft.com/prod_steampunk.html

Deathwing
12-01-2012, 07:59 AM
Jeff,

FYI the Nethercraft panels are not 4'x8'....

Jake

drfrightner
12-02-2012, 12:41 AM
We will be offering TRUE 4x8 Panels at TW. I can't post any of them until TW because I dont' want to be copied. So once TW roles around you will see new VAC FORM panels.

Larry

Darkangel
12-02-2012, 08:07 PM
Larry,

What will be the cost for your true 4x8 panels?

Thanks,

DA

drfrightner
12-03-2012, 01:46 AM
In the area of 100 dollars or so... don't have all the details yet. Larry

TrueDungeon
12-03-2012, 11:54 PM
In the area of 100 dollars or so... don't have all the details yet. Larry

Thanks Larry! Just to confirm...you will have steampunk-themed wall panels at TW? Correct? That would be great.

Deathwing
12-04-2012, 07:08 AM
Larry,

Is that $100 painted or unpainted?

You should show your designs now while we're planning and before the rush so anyone ordering can get the jump instead if getting them in in the late spring or summer. It's not like anyone else that I know has the machine to press 4x8 panels or else they'd be doing it now. Keith is not on this forum who else makes them?

Jake

Creepy Works
12-07-2012, 08:37 AM
Larry,

Is that $100 painted or unpainted?

You should show your designs now while we're planning and before the rush so anyone ordering can get the jump instead if getting them in in the late spring or summer. It's not like anyone else that I know has the machine to press 4x8 panels or else they'd be doing it now. Keith is not on this forum who else makes them?

Jake

One thing that is nice about vacuum form is there is not a whole lot of labor in it once you get your mold surface made. Getting behind production wise isn't going to be much of a problem. I used to manufacture aftermarket auto parts. As soon as I made a new item it didn't take about a month for copies to start showing up. Even though the number of manufacturers in my niche market numbered in the single digits a couple of them were very aggressive.