PDA

View Full Version : Prop fly accross hallway



Floor8Horror
06-09-2009, 09:54 AM
I want to have a corpses fly across a hallway in my haunt. I had the idea of fastening a metal track to the ceiling and then attaching the corpse to a wheel that slide a long the metal track. But I cant find any metal track or wheels that this would work for. Does anyone know where I could buy these things or does anyone else have any others ideas for me. Thanks.

P.S. Please don't say look at a hardware store because I already did and there really wasn't anything there.

evilmanor
06-09-2009, 11:46 AM
I won't say hardware store, but you can what you're looking for at Lowe's Home Improvement store in the hardware department.

Metal track
http://www.lowes.com/lowes/lkn?action=productDetail&productId=48207-1277-5116&lpage=none

http://images.lowes.com/product/converted/038613/038613105218md.jpg

backstagemike
06-09-2009, 02:31 PM
You can buy a closet track from the home improvement stores that should work as long as it's long enough for you. Same stuff used for pocket doors.

MidnightEvil
06-09-2009, 10:23 PM
You can get what you need at an electrical supply house
like CED, ask for "Unistrut or Powerstrut" most supply houses
cary one brand or the other. It looks like the lowes photo
above and they have a set of wheels that fit into the track
with an eye that you can hang your dummy on. Very strong
and heavy duty. I can hang on it and I go 250+.

scareshack
06-10-2009, 06:20 AM
Just an idea.

What about using track from a garage door. They are sold in sections and you can mount it horizintal going across the ceiling.

Floor8Horror
06-10-2009, 09:32 AM
I guess I did not look hard enough at my last trip to the hardware store. I'll have to try again.

damon carson
06-10-2009, 12:33 PM
You can probably find any of this stuff in a dumpster if you dig deep enough. Any houses being torn down in your area just ask them if you can salvage anything before its all taken away.
Damon

Jim Warfield
06-12-2009, 04:23 PM
Sell those barn door tracks, wheels, all heavy duty enough to hold a great big heavy wooden sliding door.
Mount the track on a hinge and raise and lower one end of it making the rollers go back and forth. You could figure it out like a teeter-toter and get by using a very small pnuematic cylinder or a piece of heavy weed wacker line to manually pull it.
If you had a counter weight doing half the "work" you could design it so you only had to pull the string one time, one direction, the rest would happen via gravity.
You can find gravity in ice cream shops but this particulair gravity will be hanging just on you.