HauntWorld Home - Forums Home - Live Chat - Find Haunted Houses - Hauntworld Magazine - Haunted House Supplies - America's Best Haunts - Find Vendors
Haunted House News - Haunted Tradeshows - Join Hauntworld Facebook - Hauntworld Twitter - Advertise - Contact Us

Thread: LED Lighting

Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. Default LED Lighting 
    #1
    Join Date
    Jan 2008
    Location
    Lock Haven PA
    Posts
    554
    We make our own LED lights, but I haven't been able to find the housing to put them in like Mini Spotlight Co or something similiar. The hobbie tubing is expensive and there has to be some company out there. Just don't think I am searching with the correct words. Any suggestions from any of you that make your own?
     

  2. Default  
    #2
    Join Date
    Jul 2006
    Location
    Illinois
    Posts
    356
    I would be interested in the same... this is something I would like to try to make a few of. thanks!
     

  3. Default Here is why you will love me... 
    #3
    Join Date
    Nov 2008
    Location
    Mesquite, TX
    Posts
    2,788
    Ok perhaps strong like,
    The best thing to use for the tubes is tomato stakes! they are steel tube covered in a knobby green vinyl. Cut them with a tubing cutter and you get about 20 minispot barrels out of one stake! AWESOME!
    they come in several sizes and are very inexpensive. the tubing sizes corespond very well to the 5 and 10MM LEDs.
    Get them at Lowes, Home depot, and garden supply store. Cut with a tubing cutter. The look like they are plastic, but they are steel tube underneath!
     

  4. Default  
    #4
    Join Date
    Aug 2003
    Location
    Luray, VA
    Posts
    693
    I'm gonna have to try the tomato stake idea. A couple years back I found several boxes of disposable paint brushes at an old hardware store. The handles were made of hollow metal tubes. Once I used the brush I would cut off the brush and use the tube for LED lighting. It was great! I got double use out of them.

    Louis Brown
    Owner, operator, and dish washer
    at
    DarkWood Manor
     

  5. Default So I got my tomato(e) stakes... 
    #5
    Join Date
    Dec 2008
    Location
    Aberdeen, MD
    Posts
    234
    What is the best way to fasten them to the wall still having them flexible/movable? I think I have found some L-shaped brackets that will work. I also assume that you hot glue the lights inside the tube? How could you use the stakes and still leave the bracket adjustable.

    BTW - Allen, your t-shirt is on its way! Never did see you again after Friday night at the hotel bar.
    Patrick Barberry
    www.legendsofthefog.com
     

  6. Default  
    #6
    Join Date
    Sep 2010
    Posts
    88
    I bought a bunch of the minispot LEDs from jackstoolshed and dc connectors from monoprice bought 50 female and 50 male connectors about $33 total. Then planning on soldering the female dc connector to the LED and just removing the batteries. Next, the clips on these aren't very strong so was thinking of trying to use black irrigation hosing somehow and use the cheap adjustable "C" clamps from harbor freight, will try and get back.

    These LED have on/off button so before enclosing I'd just permanently turn then on.... my plan was to make them as water resistent as possible using silicone where possible, keep the slim size, adjustable in any direction with ease of disconnecting the wires, believe I'm close.

    The LEDs are bright and very impressive, I also bought UV LEDs from Radio shack and resoldered these into the sockets of about 30 of the same spots and worked great! I also painted the plastic housing to avoid the LEDs from illuminating the housing itself, PIA...but does the job.
     

  7. Default  
    #7
    Join Date
    Nov 2008
    Location
    Mesquite, TX
    Posts
    2,788
    email me and I will send you a word doc I made for a class that shows how I assemble them.
    Stiltbeast@gmail.com

    Allen H
     

  8. Default  
    #8
    Join Date
    Apr 2009
    Location
    Santa Clarita, CA
    Posts
    222
    Quote Originally Posted by spookhaven View Post
    We make our own LED lights, but I haven't been able to find the housing to put them in like Mini Spotlight Co or something similiar. The hobbie tubing is expensive and there has to be some company out there. Just don't think I am searching with the correct words. Any suggestions from any of you that make your own?
    the lowest cost way of making a "mini spotlight" i've done is this:

    buy bulk LEDs with pre-soldered resistors and wires from ebay. take one end of a paper-clip and wrap it around the LED base, the other end will allow you to screw it into a wall. then get some heat shrink tubing, cut it to length and place it over the fixture. heat up the base so the heat-shrink will wrap over the resistor and paper clip. You've made a really cheap LED mini-spotlight.

    The world's SMALLEST and BRIGHTEST LED spotlights! Built for haunters.
     

  9. Default  
    #9
    Join Date
    Mar 2011
    Location
    Boothwyn, PA
    Posts
    60
    First can I tell you how much I love this forum! Thrilltainment love the shrink tubing idea. Per Allen's document (thanks again!) Looped floral wire is great for making a hanger for the light too!
     

  10. Default Allen's Info 
    #10
    Join Date
    May 2010
    Posts
    255
    I got Allen H. information on how to make your own and it was great... Bought 80 LEDs for 20 bucks and got the other stuff and had only maybe 2 bucks a peice ... and they work great... put them close to have a small light or move them farther away for a bigger light... I even put 3 LED in a PVC pipe for a bigger spot light... Allen i really appreciate the info you gave me.. Thanks... I will take any advise you want to give anytime... About to order some LAtex to make some rotten bodies... got in suggestions..
     

Thread Information
Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •