HauntWorld Home - Forums Home - Live Chat - Find Haunted Houses - Hauntworld Magazine - Haunted House Supplies - America's Best Haunts - Find Vendors
Haunted House News - Haunted Tradeshows - Join Hauntworld Facebook - Hauntworld Twitter - Advertise - Contact Us

Thread: Turning barrels into columns- advise wanted

Results 1 to 10 of 11

Hybrid View

  1. Default Turning barrels into columns- advise wanted 
    #1
    Join Date
    Jul 2010
    Location
    Kansas
    Posts
    422
    *advice* I meant... wow, I speller so weller...

    I have a bunch of great, straight-side cardboard type barrels I want to turn into dungeon columns, but I'm coming up short on inspiration for cheaply doing so.

    Ultimately I'd like them to look like "castle" stone columns, and I've been debating carved foam, but foam board is sort of hard to bend around a round surface- even if you cut the stones individually and stick them to the sides. I've also been debating some kind plaster coating with the grout lines carved in that, but I'm skeptical of its adhesion unless metal lath is applied first and skeptical of its overall finished appearance.

    Anyone ever pull this off?

    Thanks

    -Rob
    Last edited by zombietoxin; 06-06-2011 at 03:59 PM.
    How can a man die better than facing fearful odds, for the ashes of his fathers and the temple of his gods.

    What you put into your mind- you put into your life.


    www.zombietoxin.com
     

  2. Default Buy them 
    #2
    Join Date
    Aug 2003
    Location
    Ravens Grin Inn, 411 carroll st.mount carroll ill.
    Posts
    12,813
    Large cardboard tubes. At Home Depot and other places. They use them in concrete work and will take dampness very well.
    They come in various diameters and lengths.
     

  3. Default  
    #3
    Join Date
    Nov 2008
    Location
    Mesquite, TX
    Posts
    2,788
    He already has the barrels Jim,
    I think I know the kind your talking about while I havent used them Im sure this technique will do fine.
    Use ultracal 30 and dip burlap in it and wrap the columns with them. That will give you a good base to attach to.
    Then you could use a template to put the bricks on with more ultracal.

    If you wanted to use foam the easy way would be to bend the wire of the foam router from hot wire foam factory
    http://hotwirefoamfactory.com/-K44P6...outer-Kit.html

    to the same curve as the column and carve the backside so you dont have to bend it.
    Allen H
     

  4. Default  
    #4
    Join Date
    Jul 2010
    Location
    Kansas
    Posts
    422
    Hmmm... I wish there was a supplier for ultracal near here- I'd try it in a heatbeat. Maybe I can come up with a decent substitute...

    I have the the burlap...

    I have a hot wire.... although the thought of carving curved backs in THAT much foam does not really appeal to me...

    hmmm...

    Thanks fellas.
    How can a man die better than facing fearful odds, for the ashes of his fathers and the temple of his gods.

    What you put into your mind- you put into your life.


    www.zombietoxin.com
     

  5. Default  
    #5
    Join Date
    Feb 2004
    Location
    Mexico, Missouri, United States
    Posts
    3,271
    If it was me I would use the sonotube or how ever you spell it like Jim said. You can always use the barrels for other things! Toxic waste barrels. Gore toppers w the barrels. Barrels arent easy to come by around here. But thats what I would do with them. I wouldnt want all that weight with the possibility to fallover on someone.
    Damon
    Frightmasters
    www houseoffright com
    Damon Carson
     

  6. Default  
    #6
    Join Date
    Jul 2010
    Location
    Kansas
    Posts
    422
    Well if you had a truck and a bit of time I could prolly get you quite a few barrels. Again, they're cardboard- but very heavy duty, and perfectly clean- pretty much just like the sonotubes.

    I can also get shit-tons of awesome plastic barrels with screw lids for about 10 bucks each- these are not straight sided though... These I will use for toxic waste props.

    Not terribly concerned about toppling over as we will attach them to each other via overhead archs and to the concrete floor- but you're head is in the right place on that.

    I was considering a concrete roller stamp to make block impressions, but really don't know how well, or heavy they will turn out. I have a link to a concrete plasticizer additive to keep the set flexible, but that stuff is pretty high-dollar as well...
    How can a man die better than facing fearful odds, for the ashes of his fathers and the temple of his gods.

    What you put into your mind- you put into your life.


    www.zombietoxin.com
     

Thread Information
Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •