HauntWorld Home - Forums Home - Live Chat - Find Haunted Houses - Hauntworld Magazine - Haunted House Supplies - America's Best Haunts - Find Vendors
Haunted House News - Haunted Tradeshows - Join Hauntworld Facebook - Hauntworld Twitter - Advertise - Contact Us

Thread: Scair Structure Inflatable Haunted House

Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. Default Scair Structure Inflatable Haunted House 
    #1
    Join Date
    Mar 2012
    Posts
    4
    30' x 32' Inflatable Building
    Comes with 2 blowers
    Complete with sides roof and 28 moveable wall sections for any maze design.
    Also has custom airbrushed front and rear outside panels

    Building has 6 exits

    $3800.00 O.B.O.

    scair5.jpgscair4.jpg
     

  2. Default  
    #2
    Join Date
    Sep 2010
    Posts
    121
    What are the wall sections like?

    And could you post a picture of a typical room.
     

  3. Default  
    #3
    Join Date
    Aug 2010
    Location
    Texas
    Posts
    352
    What do the insides of your haunt look like?
    Joshua
    www.hauntedprints.com
    info?hauntedprints.com

     

  4. Default  
    #4
    Join Date
    Mar 2012
    Posts
    4
    There are moveable wall sections that are hung between the columns to make hallways or rooms. The structure has columns evenly spaced throughout, so you can configure it anyway you can dream up. This is just for the inflatable and the wall panels. Some of the panels have some airbrushing on them.
     

  5. Default Inflatable 
    #5
    Join Date
    Aug 2003
    Location
    MA
    Posts
    218
    Please check your pm

    Dan
     

  6. Default Pm ?? 
    #6
    Just checked it. Nothing there. ??
     

  7. Default  
    #7
    Join Date
    Sep 2010
    Posts
    121
    Again, what are the wall sections like...

    Fabric, velcro, inflatable, plastic sheeting, etc?

    Still interested in a photo of a plain room.
     

  8. Default  
    #8
    Join Date
    Mar 2010
    Location
    Connecticut
    Posts
    1,254
    Hey guys, I don't know this Rcarpen guy at all, however, last year we used a scAIR structure at our relay for life haunted house. It was this exact one I believe.

    To answer your questions regarding the wall panels, scAIR wall panels are a vinyl material with velcro straps on all four sides,nyou Velcro the wall panels in place however you'd like. But they are attached with Velcro, which is good iftheres a fire since you can literally just run through the walls.

    The beams are 4 ft apart from each other tho, so you cause wooden wall panels. Which is nice, because then you can really make it look detailed and you don't realize you're in an inflatable. These things DO get extremely dark inside if you have the roof on it, literally total blackout, so prepare to be really good with lighting. The roof is detachable, so if you put this guy inside you can take the roof off and not have to worry about Pinspot lighting for every inch.

    Honestly, these things are great for fundraisers (like what I needed it for) as well as traveling promotion, (throw it up at a fair or something). Or if you're using it in your haunt, make it a total blackout area with a few roaming creatures in there. Don't put all the walls up, just a few, and get people all screwed up in there. That's probably the only practical use I could say for this as an actual haunted house. If you're response is "well why not just use wooden walls?" well if you're gonna put wooden walls in there, save the extra overhead and just put the walls up like you typically would.

    Not to hurt this guys post at all, this is a GREAT piece for traveling attractions, fundraisers, and promo events, but a constant every weekend in October at the same location, you really don't need it. But for $3,800 it is one hell of a neat advertising piece.
     

  9. Default  
    #9
    David Ludick Guest
    How does this act in the wind?
     

  10. Default  
    #10
    Join Date
    Mar 2010
    Location
    Connecticut
    Posts
    1,254
    Fabulous!

    They are built like a brick sh*t house. We withstood a few scattered thunderstorms, torrential downpour, and a ton of wind during set up. We had the exact one this guy is selling, and they're really durable and really simple to set up and operate. It's just hard to get good pro quality detail from it with anything other than a temporary (day or two) set up...
     

Thread Information
Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •