HauntWorld Home - Forums Home - Live Chat - Find Haunted Houses - Hauntworld Magazine - Haunted House Supplies - America's Best Haunts - Find Vendors
Haunted House News - Haunted Tradeshows - Join Hauntworld Facebook - Hauntworld Twitter - Advertise - Contact Us

Thread: Help! Horizontal Prop Slider Mechanism

Results 1 to 9 of 9

Hybrid View

  1. Default Help! Horizontal Prop Slider Mechanism 
    #1
    Join Date
    Apr 2011
    Location
    Winter Springs, FL
    Posts
    59
    Hey gang. We're looking for some sort of mechanism that can slide a chair and actor forward at a pretty good rate for a distance of about 3 feet. We could fabricate something but our build schedule doesn't allow for it. Anybody have a lead one somebody who makes such a thing? Fright Props has some great mechanisms, but we're a little heavy for the things they make. (300# or so) Any thoughts?
    Michael Inks
    Geist Entertainment, Inc.
    Visit GEI on Facebook



    "If you can dream it, you can do it." - Walt Disney
     

  2. Default  
    #2
    Join Date
    Nov 2008
    Location
    Mesquite, TX
    Posts
    2,788
    What type of chair, or does it matter?
     

  3. Default  
    #3
    Join Date
    Nov 2004
    Location
    New York
    Posts
    454
    You are probably looking for a "rodless" actuator or air slide or linear track as they are sometimes called.

    Take a look at some of these models... just for examples:

    http://www.tolomatic.com/products/pr...fm?tree_id=101

    The plate slides along a track instead of extending a piston like in a normal air cylinder. You should be able to find one for your correct load and length. However with this type of mechanism, safety should be a concern if your sliding an actual person...
    Bill Rod.
    Dark Tech Effects
    Automated DMX Lighting
    Show Control - Audio / Visual Effects
     

  4. Default  
    #4
    Join Date
    Jul 2012
    Posts
    1
    I'm going to step in and speak for Mike for a sec,

    Alan, The chair we have is a large throne >5ft square (Think oversized chair photo op at your local county fair). We could go smaller, but we want the big regal throne. The scene is for a major character. As always, very interested in thoughts you may have.

    Bill, thanks for the link to that site. If we can't find a prefab, that could do the trick. However, at this point in our build, we're looking for "plug and play" No fabrication other than perhaps using wood to widen a platform to bolt the chair legs to the slide.

    We're just wanting to have the chair and actor move forward toward the guests (min 2', max 5'). Could be done @ slight angle using gravity, (picture C channel track, wheels on chair, wench to reset... or a "H" shaped c-channel track teeter totter w/pneumatic cylinder), or could be done with pneumatic shoving horizontally forward (probably a bit more controlled/safer).

    I've seen countless "slider mechs" in haunts moving fake trains, cars, monsters, etc... I just am not finding anything for purchase that can handle more than 100lbs

    Thanks for your Replies!
    -Andy
     

  5. Default  
    #5
    Join Date
    Apr 2011
    Location
    Winter Springs, FL
    Posts
    59
    Andy had to step in because I'm just 'the story guy.' I'm not allowed to touch power tools.
    Michael Inks
    Geist Entertainment, Inc.
    Visit GEI on Facebook



    "If you can dream it, you can do it." - Walt Disney
     

  6. Default  
    #6
    Join Date
    Jun 2006
    Location
    Eastlake, Ohio
    Posts
    836
    I do make something very much what you are looking for. http://www.evilusions.com/store/pneu...acorpse-detail

    I will be honest, it's not cheap, but it's built like a tank. It will handle over 1000lbs of downward load. Unfortunately, I can not make any before this season. Our haunt opens in 3 weeks.

    A few people on this board have this set up inside of larger props that I have built.
    Brian Warner
    Owner of Evilusions www.EVILUSIONS.com
    Technical Director of Forsaken Haunted House www.Forsakenhaunt.com
    Mechanical Designer (animatronics) at Gore Galore www.Gore-Galore.com
     

Thread Information
Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •