HauntWorld Home - Forums Home - Live Chat - Find Haunted Houses - Hauntworld Magazine - Haunted House Supplies - America's Best Haunts - Find Vendors
Haunted House News - Haunted Tradeshows - Join Hauntworld Facebook - Hauntworld Twitter - Advertise - Contact Us

Thread: How to build a Raised Platform lunge bungee scare

Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. Default How to build a Raised Platform lunge bungee scare 
    #1
    Join Date
    Apr 2011
    Location
    Fall River, Nova Scotia
    Posts
    235
    How do you build something like this? Does anyone have a video or a picture?
    I read on a different thread, that someone built this and it sounds awesome.
     

  2. Default  
    #2
    Join Date
    Nov 2009
    Location
    Michigan
    Posts
    546
    Allen does, he shared it during a class he was teaching at Midwest. He used like 5 25' bungees from Harbor Frieght ( now there is a suprise, I think he is a paid spokesman for them sometimes). Maybe Allen can post some pics for you showing it. It sounded cool and I did buy 10 of the bungees for it and they we cheep if you order on line ( 10 because I am fat and I may get the crazy idea to try it out) I have not put the rig together myself but the most expensive part is a good harness. Good luck

    Phatman
     

  3. Default  
    #3
    Join Date
    Nov 2008
    Location
    Mesquite, TX
    Posts
    2,788
    http://www.harborfreight.com/25-ft-r...oks-99891.html Take the plastic hooks off and figure 8 knot them onto a screw link.

    http://www.attackopgear.com/product/Y386.html

    Make sure all your hardware will hold 2,000 lbs and make sure no one over 200 lbs is on it.
    I normally use the attachment point that is on the upper back, but Im switching now to two attachment points on either side of the waist, that will be easier on the actor to get themselves in and out. My platform was 4ft high and 10ft back from the scarezone. my attachment point was 14ft high- it needs to be at least 12ft high to work well.
    Allen H
     

  4. Default  
    #4
    Join Date
    Aug 2005
    Location
    Henrietta NY
    Posts
    152
    allen, any pics or video for this? thanks for any help!!
    The Tallman is coming... so be very afraid!
    http://www.hauntedvoid.com
     

  5. Default  
    #5
    Join Date
    Apr 2011
    Location
    Fall River, Nova Scotia
    Posts
    235
    Allen, you never ever cease to amaze me!!!
    I would love to see this in action.
     

  6. Default  
    #6
    Join Date
    Nov 2008
    Location
    Mesquite, TX
    Posts
    2,788
    Im afraid I dont have any pics or video, believe it or not Im pretty bad about that. Next week I could set something up in my studio though and film that if it would help.
    Allen H
     

  7. Default  
    #7
    Join Date
    Nov 2009
    Location
    Michigan
    Posts
    546
    That would be great I would love to see it. Thanks Allen


    Phatman
     

  8. Default  
    #8
    Join Date
    Nov 2008
    Location
    Mesquite, TX
    Posts
    2,788
    This is my old info that I posted in the past,
    Get a better harness for comfort of the actor NOT the northern tool harness listed below (like I said this is older info)

    ***Here is a decent run down of what I did.
    I used 8 of these, I added two when I used 180lb actors as opposed to 150lb actors, so get 10 total
    http://www.harborfreight.com/cpi/cta...emnumber=99891
    after taking off the plastic clips from each end a figure eight knot was used to tie one end to
    http://www.harborfreight.com/cpi/cta...emnumber=92414
    then those were fed through a 2ft length of chain that was attached to an eye bolt at the tie off point. to find the right line height I simply had them hold the bundle of bungee cords and jump off of the platform (it was 4 ft high) when the right effect was achieved I cut the cords to the right length and attached those ends to screw links as well. they were then attached to a large hook with a locking latch that would hook to the harness.
    my first harness was http://www.northerntool.com/webapp/w...9724_200129724
    It worked fine but was not comfortable with out extra padding.
    I then went to
    http://www.northerntool.com/webapp/w...2182_200322182
    It worked great. An actor went out and bought this one for themselves and I was able to have two actors always harnessed up and able to switch out quickly.
    http://www.rei.com/product/789866
    this harness was more comfortable for them but required a loop added at the back and a tehther clip to lengthen the bungee as it attaches above the waist as opposed to between the shoulders like the other harness, but it worked out fine.
    their platform was a storage box that I use for storing haunt props. Here is a quick schematic of the layout.

    bungeescare.jpg
     

  9. Default this may sound stupid but..... 
    #9
    Join Date
    Jun 2011
    Location
    Auburndale, FL
    Posts
    126
    did you wrap the bungees together or leave them free (individual)?
     

  10. Default  
    #10
    Join Date
    Nov 2008
    Location
    Mesquite, TX
    Posts
    2,788
    Leave them free, you want them to not be bound by the slowest stretcher.
     

Thread Information
Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •