HauntWorld Home - Forums Home - Live Chat - Find Haunted Houses - Hauntworld Magazine - Haunted House Supplies - America's Best Haunts - Find Vendors
Haunted House News - Haunted Tradeshows - Join Hauntworld Facebook - Hauntworld Twitter - Advertise - Contact Us

Thread: 2 way mirror or mirror tint

Results 1 to 7 of 7

Hybrid View

  1. Default 2 way mirror or mirror tint 
    #1
    Join Date
    Nov 2011
    Posts
    107
    Looking to do a large bottomless pit. How good does one way mirror tint work when compared to a real piece of security glass? One way security glass is about $20/sqft around here. I was looking at having a large sheet of acrylic for people to walk over. Could I simply squeegee on some of this film to the bottom of my acrylic and get the same result?
    Last edited by Skeered; 07-12-2013 at 09:57 AM.
     

  2. Default  
    #2
    Join Date
    Jun 2006
    Location
    Eastlake, Ohio
    Posts
    836
    You can buy mirrored, and 2 way mirrorred lexan (polycarbonate) sheet from alot of plastics suppliers, like http://www.curbellplastics.com/ . It ran about $3/sf or $100 a sheet for 1/8" thick I believe.
    Brian Warner
    Owner of Evilusions www.EVILUSIONS.com
    Technical Director of Forsaken Haunted House www.Forsakenhaunt.com
    Mechanical Designer (animatronics) at Gore Galore www.Gore-Galore.com
     

  3. Default  
    #3
    Join Date
    Jun 2012
    Location
    Prattville Alabama
    Posts
    134
    Quote Originally Posted by Skeered View Post
    Looking to do a large bottomless pit. Could I simply squeegee on some of this film to the bottom of my acrylic and get the same result?
    Are talking about placing a mirror (acrylic) on the ground and have people walk "on it" or "over it" like on a bridge? Wondering about results...
     

  4. Default  
    #4
    Join Date
    Nov 2011
    Posts
    107
    I guess I wasn't clear...People would be walking over 3/4" clear acrylic about 3' in the air as the main means of support. Immediately below this is the security glass where you would look through it towards the ground and into the opposing mirror. If not security glass then I was wondering how mirrored see through tint would work if squeegee'd on the bottom side of my 3/4" clear acrylic sheet as it is the cheapest route. Even 2 way mirrored acrylic sheet is half the price of 2 way mirrored glass.
    Last edited by Skeered; 07-12-2013 at 11:45 PM.
     

  5. Default  
    #5
    Join Date
    Jun 2012
    Location
    Prattville Alabama
    Posts
    134
    Quote Originally Posted by Skeered View Post
    People would be walking over 3/4" clear acrylic about 3' in the air as the main means of support. Immediately below this is the security glass where you would look through it towards the ground and into the opposing mirror.
    ok, that cleared up your setup, but I'm just wondering if you'll be able to get the effect you're looking for, "the bottomless pit". Have you visited these projects before?:
    http://www.hauntproject.com/projdeta...ory=Bottomless Pits

    It looks as though people have used either or.
    I just thinking that you might need a little more distance between the acrylic and your mirror. Have you tested this setup for effect? Post some pics of it once you get it done. Could be an interesting setup. I've seen bottomless pits done before but they are normally done with a bit more distance between the bridge and the mirror.
     

  6. Default  
    #6
    Join Date
    Nov 2011
    Posts
    107
    I've done a small 2'x2' bottomless pit 3' deep with security mirror. Worked great. With a larger size pit I probably need to go deeper. Haven't put that much thought into specifics. I was thinking lower as I have to ramp up to it and that will take up valuable floor space. I thought about having mirrors at 45 degrees just to help with height issues. I guess I'll have to give the see through mirror tint a try as its cheaper than anything else.
     

  7. Default  
    #7
    Join Date
    Mar 2010
    Location
    Connecticut
    Posts
    1,231
    You can get the same effect without a ramp, make a small room and put the mirrors on the floor and ceiling, you can't have any light going into the room, texture/paint the walls with whatever you want to reflect and just put a board across the room (obviously attached to the floor) and angle the ends into your "ramp" to avoid tripping.
     

Thread Information
Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •