One more pic
Well I finally got around to posting some pics of my "Wheel of Death".
It's built from a huge spool wheel (almost 7' tall). I built the frame from 2x4s and 2x6s. I tried a lazy susan originally but only lasted a few weeks before shelling the bearings/casing. This wheel is very heavy. So I went with a 1" shaft, a couple of bearings and a 12vac gearmotor with a tire attached to spin the wheel. Works pretty good but I might try adding in a sprocket system if I have anymore problems with it.
Oh, the motor is a 13rpm motor with a 10' wheel. It's rotation speed is perfect for my use. It's kinda kreepy too because it creaks as it's turning. Just the way I like it.
Anyway, just wanted to share and fuel the imagination.
Last edited by Tom; 06-11-2008 at 04:54 AM.
Cool idea. You know, a lot of carnival rides are set up so spinning tires turn the rides. Just like you did.
I appreciate the thought. But "ouch", please keep carnival rides out of this. It sickens me to think folks compare a carnie ride to an amusement attraction/ride (not to say you actually compared but the word carnie makes me sick). Those carnies setup, take your money, tear down and move on and have no idea how a haunted ride is supposed to be much less the love and devotion needed to satisfy costumers. Not to forget an 11,000 sq ft haunted ride is just a little big for those carnie guys to handle, LOL.
One thing I wanted to add, the wheel was free. The motor (ebay), shaft and bearings (local store) ran about $60.00 all together (if I remember right). Look at the local electric companies for a free weathered spool/wheel. At a certain point, they just get rid of them.
But again, I appreciate your thoughts,
P.S. I have a strobe flashing on the wheel with a blacklight which gives it a cool effect during the spinning action.
|« Previous Thread | Next Thread »|
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)